The question of whether pavers need to be dry before sealing is one that depends on the weather. In warm, sunny climates, pavers can be ready to seal in a few hours. In colder climates or shady areas, it's best to wait about 24 hours for the pavers to dry before applying the sealant. It's essential to make sure that the pavers and pool cover are completely dry before applying the sealant.
If they are wet, the sealant won't be able to adhere properly and could eventually peel off and damage the pavers. If the weather is sunny and warm, you can apply sealants after a few hours of cleaning. The pavers will dry in a few hours and will be ready to be sealed. However, if the weather is humid, it's best to wait twenty-four hours.
The ideal condition for sealing is sunny and at 75 degrees. You can also consider sealing anytime between 50 and 90 degrees. Anything below or above this number may not be favorable. All of these elements can affect the appearance of your pavers and, if left untreated, can lead to premature deterioration.
To prepare for sealing, start by positioning a hose to spray water over the pavers, allowing the sand to settle between the joints of the pavers. We generally recommend a good, penetrating solvent sealant, as they provide flawless protection without compromising the appearance of the pavers. When it's completely dry, you can put the furniture and potted plants back on the pavers and remove the tarp from the surrounding area. You don't want to completely saturate the brick paving stone, as this will remove the freshly deposited sand; just push the sand into the joints and pack it up.
Pour the sealant into the mold of a paint roller and use a long brush to apply the sealant to the surface of the cobblestone. After that, the sun will help to evaporate any remaining water from the brick paving stone and completely dry it. You must allow freshly made concrete pavers to dry for at least 14 days before sealing them and be sure to follow the instructions provided by the paver manufacturer. If it's not possible to remove weeds by hand, spray them with a vegetation remover and wait at least 2 weeks before cleaning and sealing the pavers.
Now that you're ready to apply cobblestone sealant, start by applying it to the edges of the area with a small, clean brush before starting to cover the entire surface. If you've installed pavers in an area with a lot of foot traffic, such as an entranceway, you'll need to seal brick pavers more often than pavers in an area that doesn't get a lot of traffic. It's important not to seal pavers right away, as it's necessary for natural salt and minerals to be released first. Sealing pavers is an important step in protecting them from damage caused by weathering and ensuring they look their best for years to come.
